Miller Mig Welder- 907211 - Millermatic 211 Auto-Set with MVP -120 and 230 volts

Miller Mig Welder- 907211 - Millermatic 211 Auto-Set with MVP -120 and 230 volts

Miller's Millermatic 211 is Miller's newest Mig the is versatile , heavy duty , dual voltage , aluminum spoolgun ready , welds thin auto body sheet metal and up to 3/8" thick , all in one package . Great for your garage , car trailer , at the track , body shop, fabrication shop and more . Add Miller's Spoolmate 100 for welding aluminum and you have a great package . And this spoolgun is less than $ 200 . Ask about monthly whe you purchase the Millermatic 211 and the package s with the Deluxe Cart and Spoolmate 100 . Here are Miloler;s Specs:

Auto-Set : The right settings automatically -
Set the wire diameter, a blue light shows that Auto-Set is activated
Dial in the thickness of what you're welding
Start welding with the exact parameters you need! Infinite voltage control gives you the flexibility to manually set the machine when welding aluminum, stainless steel, or anytime you want to set your own parameters on mild steel.
Welds thickest material in its class! The Millermatic® 211 Auto-Set with MVP has the highest output in its class. It can weld from 24 ga-3/8 in (0.8-9.5 mm) mild steel in a single pass on 230 Volts
Spool gun ready out of the box! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-Set with MVP, the new Spoolmate™ 100 Series spool gun allows you to weld from 18 ga - 3/8 in aluminum.
Smooth-Start™ patented technology provides a smooth, spatter-free start. It's the best-starting machine in the small MIG machine category. No pop gun starts and virtually no spatter to clean up.
Miller Exclusive! Multi-voltage plug (MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle and connect it to the power cord.
Durable cast aluminum drive system incorporates dual-groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.
Miller's exclusive "Tip Saver" short circuit protection™ shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at gun rather than at the machine.
Cable management built into the handle.
Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.035 in (0.6-0.9 mm) mild/stainless steel and .030-.045 in (0.8-1.2 mm) flux cored.

For more info call Bob Romero at 800-783-3073 or go to http://www.brweldingsupplies.com/

Miller Millermatic 211 Mig Welder W/ Deluxe Cart and Spoolgun Special

Millermatic 211 W/Auto-Set™: The right settings automatically -
Set the wire diameter, a blue light shows that Auto-Set™ is activated
Dial in the thickness of what you're welding
Start welding with the exact parameters you need!
Infinite voltage control gives you the flexibility to manually set the machine when welding aluminum, stainless steel, or anytime you want to set your own parameters on mild steel.
Welds thickest material in its class! The Millermatic® 211 Auto-Set™ with MVP™ has the highest output in its class. It can weld from 24 ga-3/8 in (0.8-9.5 mm) mild steel in a single pass on 230 V.
Spool gun ready out of the box! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic® 211 Auto-Set™ with MVP™, the new Spoolmate™ 100 Series spool gun allows you to weld from 18 ga - 3/8 in aluminum. Includes the Miller 770187 Deluxe Cart and 1 free roll of 4043 Aluminum wire . Buy all 3 and ask for a free cover until 12-31-09

Call 800-783-3073 and ask for Brant or Bob Romero or go to http://www.brweldingsupplies.com/

Thermal Arc 95S Sitck / Tig Welder

Thermal Arc's newest inverter the 95 S that replaces the Dragster model . The new 95s has been tested extensively and shows great promise . The 95S works on 120 volts , is fan cooled, has lift arc tig capability , a 1 year warranty . The Thermal Arc 95S come in two models . A Stick package with case , cables , DVD and electrodes . The Thermal Arc Stick/Tig package comes with the cables , tig torch , regulator, DVD , electrodes and case .
Stick Package # W1003202
Stick-Tig Package # W 1003203

Call Bob Romero @ 800-783-3073 or go http://www.brweldingsupplies.com/

Evolution Mustang Magnetic Drill & Cutters Special Deal

Evolution Mustang Magnetic Drill
Model: EVO ME3500
6 Piece Cutter Set
Special price for Nov 2009 $ 679.00

ME3500 Portable Magnetic Drill
The amazing ME3500 magnetic drilling system may be small, but it features a powerful 1200-watt motor, ‘Lock N Load’ quick release cutter and arbor system, gravity oil feed, and high magnetic adhesion, which makes it ideally suited to those lighter duty jobs both on and off site. Compact, lightweight and portable, its price and performance is unmatched, making it a cost-effective addition to any workshop. All backed by the unique Evolution 36-Month warranty.
_________________________________
Technical Specifications
Motor (230v or 115v 50/60 Hz) (Watts)
1,200 Watt
Maximum Cutter Diameter
1 1/2"
Maximum Cutting Depth
2"
RPM No Load Speed 1 (min -1)
550
Recommended Maximum Duty Cycle (Minutes)
30
Sound Pressure Level (Under Load) (dB(A))
90
Weight
28lb
Maximum Dimensions Rack Fully Raised (HxWxD)
18 3/8" x 10 1/4" x 11 3/4"
Maximum Dimensions Rack Fully Lowered (HxWxD)
15 1/16" x 8 5/8" x 11 1/4"
Magnet Dimensions (HxWxD)
1 7/8" x 3 1/8" x 6 7/16"
Magnetic Adhesion
3307lb
Cutter Retainer Internal Diameter
3/4" Weldon Shank
___________________________________________________________________________
- The Amazing ME3500 magnetic drilling system with heavy duty arbor system.
- Cutting capacity 7/16" to 1-3/8". Cutters available in 1" and 2" depths, twist drill capacity 1/2".
- Powerful 1200 watt 550rpm motor copes with the heaviest of work. Earth grounded.
- Magnetic Holding 3307lb.
- Weighs 28lbs and rotates at 550 revolutions per minute (no load).
- Includes, cutter guard, chain, operators manual, carry case.
- High quality construction with 36 months warranty.

TechSouth Tungsten Grinders

Our Miller rep came in last week to do a demo and showed us a tungsten grinder that he had been using for a while . It was a TechSouth Tungsten grinder . This is a very well made , dependable and does a great job at a reasonable price . TechSouth makes four models : standard, adjustable, adjustable with vacuum and a 220 volt model. Here are some specs.
The Standard Grinder is an excellent tool for hand orbital welding when using tungsten electrodes. The grind is always consistent for precise arc striking and concentration. The standard unit has a fixed angle 20 degrees included.
The diamond wheel is double sided and the movable disk allows the settings for two grooves on the top; as well as, two on the bottom so the entire wheel is used for grinding.
The Adjustable Head Grinder allows you to set various angles on the tip of the tungsten, for the more difficult tig welding project; especially when welding thin materials. This one is $270
The Vacuum Head Unit comes complete with an adjustable grinding head for various angles and a vacuum that extracts the tungsten dust to a vacuum bag that can be emptied or replaced.
You can pick these up at http://www.brweldingsupplies.com/ or call Bob Romero @ 800-783-3073

Evolution Fury Metal Cutting Saw

EVOLUTION FURY SAW
Selling welding supplies and trying them out personally is is not always an option . I did have the opportunity to try out the Evolution Fury 7 1/4 " saw. I had to cut a 3 " aluminum 1/4" pipe , 1/4" aluminum diamond plate , and some 1/8" steel plate . It was flawless and went thru all three like butter . The cuts were clean and smooth and fast . Its nice to know that the products you sell are as advertised and you can relate that to your customers with confidence . For a saw that cuts steel, aluminum , wood ( with nails) and plastic for $ 85.00
Bob Romero at brweldingsupplies.com 800-783-3073

MIller ArcStation Welding Station Work Bench

Miller's ArcStation Welding Station Work Bench
Finally the Workbench You’ve Been Waiting For.
ArcStation is the first ever, all-in-one workstation designed for welding and metalworking. It’s versatile. It’s affordable. And it comes in two convenient table sizes: Approximately 30" x 30" or 30" x 60" to meet your space requirements. You can also customize your workbench with a wide range of handy accessories.

Whether for the home shop or the fab shop, ArcStation’s the answer you’ve been looking for.
Miller Literature
Miller Brochure
This comes in different designs and module packages.
Call Bob Romero @ 800-783-3073
We have all of the ArcStation products listed at http://www.brweldingsupplies.com/

Miller Trailblazer 302 Air Pack W/ Battery Charging

Miller's New Trailblazer 302 W/ Battery Charging and Jump Starting
Available in 6 different packages

907447 W/Battery Charger & Jump
907447002 W/Battery Charger, GFCI
907447003 W/Battery Charger-GCFI-Ele Fuel Pump
907447005 W/ Battery Charger-Cool /Sep-GFCI
907744006 W/Battery Charger-Cool/Sep-GFCI-Ele Fuel Pump
Powerful all-in-one tool is designed for repair and construction with unbeatable multiprocess weld quality, integrated rotary screw air compressor, and 13,000 watts of generator power for job site tools.
Three take-charge tools in one
The all-in-one tool that delivers multiprocess output for welding, plasma cutting, gouging, and air tools.
Accu-Rated™ 13,000 watts of usable peak generator powerProfessional welding performance in all processes with the best welding arc in its class.
Rotary-screw compressor delivers 26 CFM of air at 100% duty cycle.
Battery Charger / Jump Starter -provides 12 or 24 volts battery charging capability
Provides up to 450 amps of Battery jumpstarting
Convenient front panel battery charger/jump starter access
25ft battery jumper cables available( # 300422- extra)

Hobart introduces the Airforce 500i & 700i plasma cutters

Hobart has introduced 2 new plasma cutters. The Airforce 500i and 700i .

The 7001 incorporates:

New Inverter Design - Powerful cutting ability at just over half the weight of prior model (AirForce 625). Weighs only 31.4 lbs.
Capable with Engine-Driven Welders - Capable of cutting 3/8 to 5/8 in. mild steel when powered by an engine-driven welder with a 240 V generator power outlet of 8 kW or more.
New Ergonomic Torch - The new HP-70 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.

The 700i requires 230 V/50 A input power and compressed
air delivery of at least 4.8 scfm @ 90 –120 psi.
Maximum cutting of mild steel is 7/8 inch at 50%
duty cycle for heavy duty production requirements.

The 500i incorporates :

New Inverter Design - Powerful cutting ability at half the weight of prior model (AirForce 400). Weighs only 27.8 lbs.
Capable with Engine-Driven Welders - Complete cutting capability when powered by an engine-driven welder with a 240 V generator power outletof 6 kW or more.
New Ergonomic Torch - The new HP-50 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
Multi-Voltage Plug (MVP) - Allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle
Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.

Designed to cut up to 5/8 inch mild steel, the AirForce™
500i is powered by standard household receptacles
(115 or 230 VAC) using the MVP™ (multi-voltage
plug) designed to change voltage with no tools.

Call Bob Romero @ 800-783-3073 or go to www.brweldingsupplies.com

New Submicron Fume Extractor From Miller- FILTAIR 130 Fume Extractor Provides Portable Welding Fume Extractor

New Submicron Fume Extractor From Miller- FILTAIR 130 Fume Extractor Provides Portable Welding Fume Extractor

Miller Electric Mfg. Co. today introduces the latest in its line of welding fume extraction devices, the FILTAIR 130. Designed specifically for welding, the FILTAIR 130 provides contractors, maintenance and repair operations and other intermittent welding applications with the highest level of fume filtration in its category in a light and portable package.
Whereas nearly 90 percent of welding fumes are between .1 and .4 microns, the FILTAIR 130 captures particles down to .1 micron, compared to competitive units that only capture particles .4 microns and larger.
For reduced operator downtime and maintenance costs, the FILTAIR 130 features a quick manually cleanable filter using compressed air for extended filter life.
The FILTAIR 130 is easily carried or rolled wherever welding is required. Plus, the unit’s variable speed 1hp motor filters up to 132 CFM at just 68.5 decibels, making it one of the quietest units available. The FILTAIR 130 comes with a standard 8-ft. collection hose; also available are optional 17- and 34-ft. hoses, all of which connect to funnel or slotted nozzles or a fume extraction welding gun.
Call Bob Romero @ 800-783-3073 or check this out at http://www.millerweldersales.com/

MIllermatic Reach Portable extension feeder for Millermatic 212

Miller has come out with a new product, the Millermatic Reach . This is a portable unit that hooks up to your Millermatic 212, 251, 252 , 350 and 350P mig welders. There are 2 choices a 6' ( 907437) and a 25' ( 907438 ) cord version . The Reach does not come with a mig gun so that lets you decide as to which gun you need as to amperage requirements or use the gun that is on you Millermatic . The Reach would be great for scaffolding ,in the back of truck beds or anywhere you cant get the machine into or up on . If you add the lenght of the cord 25' , unit 3 ' , gun 15' that gives you up to 43' from the Millermatic to Reach out. Here are some of the specs.
Use the Reach with your Millermatic 212 Auto-Set, 252, or 350/350P to extend your work area or to create a dual feeder, avoiding downtime from changing wire spools.
Extend your Millermatic work area up to 40 ft! No more moving the machine and pulling primary power cables around the shop.
Use as a dual feeder option! Keep one wire in the machine and a different wire in the feeder. No more downtime changing spools and drive rolls.
Auto-Gun Detect™ — when connected to a Millermatic 252 or 350P, simply pull thetrigger on either gun and the Millermaticmachine will recall both voltage & wire feedspeed of the active gun.
Synergic Pulse Capability when connected to Millermatic 350P. Remotely change weld output by simply adjusting wire feed speed setting at the feeder.
Patent-pending Hybrid Technology—connects to Millermatic 10-pin connector andwelding output circuit.
Polypropylene case with built-in slide rails gives you the ability to easily change wire when in vertical position.
Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.
Comes standard with .035/.045reversible drive rolls.
Works with any Miller-compatible MIG gun (MIG gun sold separately)
Compatible with the following Millermatic models:Millermatic 212 Auto-Set™Millermatic 251Millermatic 252Millermatic 350P
Call Bob Romero at 800-783-3073 for more info

Miller Dynasty wont switch polarity with Weldcraft Legacy Torch

When trying to switch polarity with the Weldcraft Legacy Torch on a Miller Dynasty 200 DX and the Dynasty wont accept the change , make sure you have the button pushed to OFF on the tig torch . If the button is ON the machine thinks it is still welding and wont allow a change . We have had a few call about this and this was the fix.

Weldcraft Legacy LS1712R Torch for Miller Maxstar 150 STH & STL

We now have the Weldcraft Legacy Torch with the built in fingertip control for the Miller Maxstar 150 STH and Maxstar 150 STL welders. This make a more compact unit and easier to use & carry . This torch can also be used on The Maxstar 200 series and any Miller Tig with a 14 pin control . You have to checkout you your amperage requirements as this torch is rated at 150 amps DC and 125 amps AC @ 60 % duty cycle . The torch come in 12' and 25' lengths.

Call Bob Romero @ 800-783-3073 for more info
brweldingsupplies.com

MIller Spoolmate 200 Spoolgun # 300497

Miller has introduced a new Spoolgun , the Spoolmate 200 . Miller recently stoped production of the Spoolmate 3545 and came out with the Spoolmate 200 to fill a void for the 210 , 212, 251 and 252 mig welders .

Specs on the Miller Spoolmate 200 Series Spoolgun

Part # 300497
The Spoolmate 200 Series is designed specifically for Home Hobbyist and Light Fabricators . It's the mosteconomical & reliable spool gun in its class ! It's perfect for the Millermatic 212 Autoset , however it can also be used on the Millermatic 251 & 252's for customers performing light duty welding .Hook up recommendations :
Power Source
Spoolmate 200 Series
Millermatic 212 Autoset, 251 & 252
Direct Connect ( plugs into the 10 pin port)
Millermatic 210 & 212
Need's adapter cable # 195287 ( no remote WFS)
Product Features :160 A @ 60 % duty cycle( .023-.035 wires) - perfect for home hobbists & light-duty fabrication shops.Wire Speed adjustments on the gun- makes it easy to quickly change WFS20 ft heavy duty cable with cable sheath & strain reliefEasy barrell removal- 9 inch extension , heavy -duty & 45 degree barrell are now availableTwo-Stage trigger with built-in-gas valve - allows pre-flow & post flowStill plugs into the 10 pin connections allowing spoolgun & Mig gun to be hooked up simultaneously.Features:Hinged wire spool cover makes it easy to access wire compartmentPressure lever for easy loading & unloading of wireClear spool cover shows amount of wire left on spoolHeavy duty motor & cast aluminum gearbox3 optional barrels : 45 degree ( 300591)9 inch extension barrell ( 302592)Heavy Duty barrell ( 300593)


Light and Heavy Industrial Applications:
Aluminum fabrication.
Sign Manufacturing.
Trailers.
Auto and Marine repair.

WeldingOutputRating is 150 A @ 60 % Duty Cycle

Wire Speed 70-875 IPM
Wire Diameter Capacity : . 023 to .035
Maximum SpoolSize Capacity 4 "
Dimensions H 9" x W 2 1/2" x L 15 1/4 "
NetWeight : 11 lbs

For more info call Bob @ brweldingsupplies 800-783-3073

Optrel's New Welding Helmets K6800- K6700-K6500

Optrel has 3 new welding helmets available now . These replace the Optrel Satellite , Orion and Helios models . The new models K6800 , K6700 , K6500 . P250 , P350.

The Expert models K6800 Series, the helmet Optrel e680 - based on the previous model Optrel Satellite - has been designed specially for welders with varying job requirements and a need for an extensive range of individual adjustment options.The features include protective levels from DIN 5 to DIN 13 and various additional options that provide the welder with absolute freedom and unrestricted comfort.The enlarged field of view (+ 33%) and true color filter allows the welder a brilliant, detailed view of the welding object.

The Expert models K6700 Series -Welding requires complete concentration. This is no problem with the Optrel e670 - the successor model of the Optrel Orion: the unique sensor technology allows the welding cartridge to automatically select the protection level and constantly adapt it to the welding application using the intensity of the arc during the welding process.The user can select “Auto” or “Manual”. In the “Manual” setting, the user can select the protection level that is best for him. He can adjust the shade setting as required to ensure the most comfortable shade level at all times.If the welder selects “Auto”, the helmet automatically adapts the protection level to the current arc intensity. He can also use the fine adjustment to adjust the automatically selected protection plus or minus one shade level to satisfy his individual needs without the fear of any problem of eye damage. The enlarged field of view (+ 33%) and true color filter allows the welder a brilliant, detailed view of the welding object.

The Expert models K6500 Series -The new 9-13 helmet out of the Sperian Expert-line meets all sorts of needs: comfort and customization possibilities, a large viewing area and consistent quality make the Optrel e650 an optimal working tool for most welding processes. Additional to the infinitely variable shade level from 9 to 13, the helmet offers a sensitivity and delay function, adaptable from the outside of the helmet. This guarantees a maximum on comfort and absolute efficiency for every welder.

Call Bob @ brweldingsupplies for more info 800-783-3073

Miller Coolmate 1 Water Cooler for Tig Welding 300360

MILLER COOLMATE 1 Water Cooler for Tig Welding # 300360

Miller Coolmate 1 is a 115 VACLight industrial, 1-gallon cooler designed for water-cooled torches on power sources rated up to 200A. Compact horizontal design allows stacking and convenient mounting. Filter and coolant filling spout are conveniently located for easy access.

For a great deal call Bob @ brweldingsupplies 800-783-3073

Miller Spoolmate 100 Spoolgun 300371

Miller Spoolmate™ 100 Series Spoolgun 300371
Your choice for exceptional aluminum welding results for do-it-yourself projects.

Superior features include:
Direct Connect cable allows for easy change over and set-up on aluminum.
Recessed contact tip for easier welding and prevention of burn back issues.
Dual V-knurled drive rolls for consistent feeding.
Adjustable pressure lever for easy unloading and loading of wire.
Adjustable drive roll tension for feeding different types of wire.
Heavy-duty cast-aluminum gearbox and drive motor.
12 ft. cable with heavy-duty strain relief to protect against kinking.
Comes complete with 12 ft. cable, custom carrying case, and extra contact tips and nozzle.

Welding Output Rating
135 A at 30% Duty Cycle
Wire Diameter Capacity
.030 - .035 in (0.8 - 0.9 mm) aluminum
.023 - .035 in (0.6 - 0.9 mm) steel, and stainless steel
Wire Speed
MM 140: 5-365 IPM
MM 180: 65-625 IPM
Max Spool Size Capacity
4 in (102 mm)
Net Weight
5 lb (2.3 kg) with cable assembly

Miller Spec Sheet http://www.millerwelds.com/pdf/spec_sheets/M1-45.pdf

For a great deal call Bob @ brweldingsupplies 800-783-3073

Miller Trailblazer 302 Air Pak 907326

Trailblazer® 302 Air Pak 907376
Powerful all-in-one tool is designed for repair and construction with unbeatable multiprocess weld quality, integrated rotary screw air compressor, and 13,000 watts of generator power for job site tools.

Three take-charge tools in one
The all-in-one tool that delivers multiprocess output for welding, plasma cutting, gouging, and air tools.
Accu-Rated™ 13,000 watts of usable peak generator powerProfessional welding performance in all processes with the best welding arc in its class.
Rotary-screw compressor delivers 26 CFM of air at 100% duty cycle.
Requires Half the SpaceTakes only half the bed space of a separate engine-driven air compressor and welder, freeing up 50% more room on your truck for equipment and supplies.
Better Truck PayloadOffers up to 25% less axle weight for payload advantage.
Strongest Combined Generator/Compressor Power Delivers an industry-leading 13,000 watts of peak generator power independent of weld settings—enough to power a Spectrum® 875 plasma cutter, and provide air for plasma cutting at the same time. (Rated 5/8" mild steel)

Ultra-Reliable Rotary-Screw Compressor Quiet, durable rotary-screw compressor delivers 26 CFM at 70–160 psi (up to 160 psi) of air at 100% duty cycle while rated at 104° F, compared to the industry standard of 68° F. It offers an average of three times the service life of traditional reciprocating compressors.
Deliverable Air, On DemandProduces 100% deliverable air when you need it: no more down time waiting for an external tank to fill. Airflow can be selected depending on tool requirements.

Rated Output at 104° F (40°C)
CV/DC: 300 A, 32 V at 100% Duty Cycle; 350 A, 32 V at 60% Duty Cycle
CC/DC: 280 A, 32 V at 100% Duty Cycle
CC/AC: 200 A, 25 V at 100% Duty Cycle
Air Compressor: 26 CFM at 100% Duty Cycle
Output Power Range
DC Stick: 25 - 300 A
DC TIG: 10 - 300 A
AC TIG/Stick: 10 - 225 A
MIG/FCAW: 13 - 35 V, 350 A
Generator Power- rated at 104°F (40°C)
Peak: 13,000 W
Continuous: 11,000 W
Air Compressor: 26 CFM, 100% Duty Cycle, 70-160 PSI
Net Weight
771 lb (350 kg) without fuel
Engine
Twin-cylinder, 30 hp Kohler gas

Miller Spec Sheet :http://www.millerwelds.com/pdf/spec_sheets/ED4-78.pdf

For a great deal call Bob @ brweldingsupplies 800-783-3073

Miller Dynasty 200 DX Tig Runnert Series 951140 & 951139

Maximum flexibility - Miller Electric combines advanced inverter technology with Auto-Line™ technology, offering the most flexible AC/DC TIG/Stick power supply in the welding industry.

NEW! Complete water-cooled packages —One stock number provides all the necessary items required for a water-cooled TIG welding system.
AC TIG Features
NEW! Blue Lightning™ - High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.
Extended AC Balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.
NEW! AC Waveforms
Advance Squarewave, fast freezing puddle, deep penetration, and fast travel speeds.Soft Squarewave for a soft buttery arc with maximum puddle control and good wetting action.Sine wave for customers that like a traditional arc. Quiet with good wetting.Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds.
DC TIG Features
Exceptionally smooth and precise arc for welding exotic materials.
Stick Features (AC/DC)
Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
Hot Start™ adaptive control provides positive arc starts without sticking.
AC frequency control adds additional stability when Stick welding in AC for smoother welds.
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
---------------------------------------------------
Built-in pulser reduces heat input; adds arc stability (DX model only).
Fan-On-Demand™ cooling system only operates when needed.
Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Portable in the shop or at the job site - at 45 lb the unit is easily moved from location to location.
Lift-Arc™ start provides TIG arc starting without the use of high frequency.
Wind Tunnel Technology™ is an Internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.
LVC™ Line Voltage CompensationKeeps output of the power source constant regardless of fluctuation in input power ± 10%.
Squarewave technology is the AC output of a power source that has the ability to rapidly switch between the positive and negative half cycles of alternating current.
Thermal Overload ProtectionInternal components are protected from damage by thermal overload protection automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.

______________________________________

COMES WITH

Dynasty 200 DX Fingertip OR Foot Control packageComplete
Dynasty 200 DX power source
10 ft (3 m) primary cord
(2) Dinse 50 mm connectors
2-Wheel Trolley Cart
Coolmate™ 1 Cooler 120VAC
Coolant (1 gallon)
RCCS-14 Remote Finger Tip or 14 HD Foot Control
25 ft (7.6 m) Weldcraft® WP20 water-cooled torch
Torch accessory kit with tungsten
Shielding Cups
Collets-1/16, 3/32, 1/8
Collet Bodies-1/16, 3/32, 1/8
2% Cerium Tungsten-1/16, 3/32, 1/8
15 ft (4.6 m) work lead w/clamp
10 ft (3 m) gas hose
Smith Regulator/flowmeter
Torch Cable Cover

________________________
Call Bob @ brweldingsupplies for a great deal 800-783-3073

_______________________

Miller Diversion 165 AC DC Tig Welder 907005

Miller Diversion™ 165 AC DC Tig Welder # 907005
The Personal User's AC/DC TIG machine. Set a material type and thickness, and you are ready to weld.

NEW! Easy-to-understand operator interface. Only three switches to operate the machine: a power switch, a material selection switch, and an amperage control/material selection switch.
Inverter-based, AC/DC power source provides a more consistent welding arc while operating more efficiently (less energy is used).
Portable. Whether it's in the shop, garage or at the race track, at 50 pounds it can be taken anywhere.
HF start for non-contact arc starting that eliminates tungsten and material contamination.
Fan-On-Demand™ improves power efficiency and reduces noise and maintenance by lessening the amount of airborne contaminants pulled through the machine

Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage - for adequate shielding every time without waste and no need for adjustment.
Fully adjustable amperage control from 10-165 amps DC and AC.
NEW! Weldcraft® LS17 TIG Torch. 150 A, air-cooled torch features the hand controlled amperage adjustment built into the handle of the torch.

Comes Complete With
Power source with primary cord (50A, 230 V plug, attached)
12.5 ft (3.6 m) LS17 Weldcraft® TIG torch with backcap, ceramic gas cup, 3/32 in (2.4 mm) collet and collet body, and 2% ceriated tungsten
11 ft (3.4 m) work cable and clamp
Smith® Argon regulator/flow gauge with hose
TIG Welding for Dummies book
Set-up and operation DVD
Welding project blueprint for a machine cart/cylinder rack

For a great price call Bob @ brweldingsupplies 800-783-3073

Millermatic 212 Autoset Mig Welder 907405

Miller's Millermatic 212 Mig Welder W/Autoset 907405

New! Auto-Set™ is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly.
Manual Mode allows you to manually set weld parameters for broader applications.
NEW! Infinite voltage control replaces "tap" settings which means you can now "dial in" precise weld voltage and wirefeed speed when using the Manual Mode.
Compatible with Spoolmatic® 15A/30A spool gun! The Spoolmatic 15A/30A saves time for the operator by eliminating the need to go back to the machine to change the spool gun wirefeed speed.

Larger work area - now with longer 15-ft M-25 gun.
Patent-pending EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
Compatible with Bobcat™ welder/ generators.

This is available at www.brweldingsupplies,com

The Millermatic 211 is Miller’s answer to a small , portable medium-duty mig welder that can be used on both 120 and 230 volts . The Millermatic 211 uses the MVP plug system as the DVI2 and Spectrum Xtreme 375. The Millermatic 211 welds up to 3/8″ in a single pass .New features include Auto-Set , Smooth Start feature , and Tip Saver .
Welds 24 gauge to 3/8″ steel
Welds 18 gauge to 1/4″ aluminum
Welds thickest material in its class- up to 3/8″ in a slngle pass.

Hooking up a Miller Spoolmate 100 to a Millermatic 211 is a breeze and makes a great combo package for almost any kind of welding in your shop .

This unit list for $ 1197 but at www.brweldingsupplies.com . its $ 960 delivered.

Call 800-783-3073 for more info.

Welding Fume Extractors and Hexavalent Chromium

Not all fume extractors are created equal !!! All extract welding fumes and particulates from the air and they do make for a cleaner environment . But unless they have a hepa filter dont expect to get rid of Hexavalent Chromium .
Hexavalent Chromium, or Cr(VI), became a part of the welding lexicon with the implementation of OSHA Standard 29 CFR 1910.1026. Compliance methods discussed in the standard center around the need to reduce Cr(VI) to a specified PEL, or Permissible Exposure Limit. Methods of compliance include materials substitution, employee isolation, and ventilation. All methods have their merits and limitations, and their utilization depends largely on the needs and circumstances of individual welding operations.
Where substitution and isolation methods are not practical, a welding operation seeking compliance with the OSHA standard will by necessity turn to ventilation methods. These methods include circulation fans and local exhaust, or source capture, systems. Circulation and exhaust fans, while widely used, do not by their nature clean air, but only disperse Cr(VI) particulate. As such, this method may not necessarily reduce PELs to compliance levels, and could leave workers at risk.
OSHA therefore recommends that welders utilize source capture systems, indicating that such systems provide the cleanest and healthiest workplaces. Source capture systems include filtering machines such as fume extractors and downdraft tables, and fume exhausters used with extraction arms. Filtering units provide a greater degree of protection of the two source capture methods, because the units capture and contain the harmful particulate and recirculate clean air back into the workplace. While various types of filters exist for this purpose, HEPA filters provide the absolute greatest protection.
Ace Fume Extractors offers many source capture products that can be equipped with HEPA filters are indicated on their website with the following symbol:

This symbol is your assurance that you have selected a product that provides the greatest level of protection against Hexavalent Chromium.
So depending upon your level of exposure and regulations make sure you have a quality and safe extractor in place . For more info call 800-783-3073 BR Weldingsupplies.

BR Welding Supplies launches its new website.

BR Welding Supplies is happy to announce the launch of our new website. It has been several years since we have had a new look. With the new look comes new features. We now have a newsletter list that you can join. By joining this list you will get access to special deals, coupons, welding tips, and much more. Also if you are not ready to purchase an item yet you can easily add it to you wish list. That way when you are ready to buy you can just come back to your wishlist. No need to hunt down the item twice. So stop on by and check us out. New look, but same great store and even better prices.

BR Welding Supplies

TECHSOUTH TUNGSTEN GRINDERS FOR $ 225

Our Miller rep came in last week to do a demo and showed us a tungsten grinder that he had been using for a while . It was a TechSouth Tungsten grinder . This is a very well made , dependable and does a great job at a reasonable price . TechSouth makes four models : standard, adjustable, adjustable with vacuum and a 220 volt model. Here are some specs.

The Standard Grinder is an excellent tool for hand orbital welding when using tungsten electrodes. The grind is always consistent for precise arc striking and concentration. The standard unit has a fixed angle 20 degrees included.

The diamond wheel is double sided and the movable disk allows the settings for two grooves on the top; as well as, two on the bottom so the entire wheel is used for grinding.
The Adjustable Head Grinder allows you to set various angles on the tip of the tungsten, for the more difficult tig welding project; especially when welding thin materials. This one is $270
The Vacuum Head Unit comes complete with an adjustable grinding head for various angles and a vacuum that extracts the tungsten dust to a vacuum bag that can be emptied or replaced.

This beats the old bench grinder that leaves deposits and residue that can cause weld contamination .

Millermatic 140 MIG Welder w/Auto-Set
Miller 907335
Miller Part # 907335

Features
Auto-Set™ features the breakthrough control that automatically sets your welder to the proper parameters. It works with .024 and .030 in solid steel wire, (75% argon/25% CO2) shielding gas, and provides all-in-one MIG , minus the guesswork. Just set the wire size, set the material thickness, and start welding.
New! Spool gun compatibility makes for reliable and economical aluminum welding .

Spoolmate 100
Smooth-Start™ technology provides a smooth, spatter-free start.
Infinite Voltage Control with Manual On/Off Wire Feed Speed Tracking
Miller’s Exclusive “Tip Saver” Short Circuit Protection
Durable Cast Aluminum Feedhead
Factory-installed Gas Solenoid Valve
Standard Built-in Solid-State Contactor Circuit
Thermal Overload Protection
Easy access to output studs provides easy switching between solid or flux cored wires
Self-resetting Motor Protection Circuit
Uses 4 or 8 in (102 or 203 mm) spools