Miller Diversion™ 165 AC DC Tig Welder # 907005
The Personal User's AC/DC TIG machine. Set a material type and thickness, and you are ready to weld.
The Personal User's AC/DC TIG machine. Set a material type and thickness, and you are ready to weld.
NEW! Easy-to-understand operator interface. Only three switches to operate the machine: a power switch, a material selection switch, and an amperage control/material selection switch.
Inverter-based, AC/DC power source provides a more consistent welding arc while operating more efficiently (less energy is used).
Portable. Whether it's in the shop, garage or at the race track, at 50 pounds it can be taken anywhere.
HF start for non-contact arc starting that eliminates tungsten and material contamination.
Fan-On-Demand™ improves power efficiency and reduces noise and maintenance by lessening the amount of airborne contaminants pulled through the machine
Inverter-based, AC/DC power source provides a more consistent welding arc while operating more efficiently (less energy is used).
Portable. Whether it's in the shop, garage or at the race track, at 50 pounds it can be taken anywhere.
HF start for non-contact arc starting that eliminates tungsten and material contamination.
Fan-On-Demand™ improves power efficiency and reduces noise and maintenance by lessening the amount of airborne contaminants pulled through the machine
Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage - for adequate shielding every time without waste and no need for adjustment.
Fully adjustable amperage control from 10-165 amps DC and AC.
NEW! Weldcraft® LS17 TIG Torch. 150 A, air-cooled torch features the hand controlled amperage adjustment built into the handle of the torch.
Fully adjustable amperage control from 10-165 amps DC and AC.
NEW! Weldcraft® LS17 TIG Torch. 150 A, air-cooled torch features the hand controlled amperage adjustment built into the handle of the torch.
Comes Complete With
Power source with primary cord (50A, 230 V plug, attached)
12.5 ft (3.6 m) LS17 Weldcraft® TIG torch with backcap, ceramic gas cup, 3/32 in (2.4 mm) collet and collet body, and 2% ceriated tungsten
11 ft (3.4 m) work cable and clamp
Smith® Argon regulator/flow gauge with hose
TIG Welding for Dummies book
Set-up and operation DVD
Welding project blueprint for a machine cart/cylinder rack
Power source with primary cord (50A, 230 V plug, attached)
12.5 ft (3.6 m) LS17 Weldcraft® TIG torch with backcap, ceramic gas cup, 3/32 in (2.4 mm) collet and collet body, and 2% ceriated tungsten
11 ft (3.4 m) work cable and clamp
Smith® Argon regulator/flow gauge with hose
TIG Welding for Dummies book
Set-up and operation DVD
Welding project blueprint for a machine cart/cylinder rack
For a great price call Bob @ brweldingsupplies 800-783-3073
No comments:
Post a Comment