Hobart has introduced 2 new plasma cutters. The Airforce 500i and 700i .
The 7001 incorporates:
New Inverter Design - Powerful cutting ability at just over half the weight of prior model (AirForce 625). Weighs only 31.4 lbs.
Capable with Engine-Driven Welders - Capable of cutting 3/8 to 5/8 in. mild steel when powered by an engine-driven welder with a 240 V generator power outlet of 8 kW or more.
New Ergonomic Torch - The new HP-70 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
Capable with Engine-Driven Welders - Capable of cutting 3/8 to 5/8 in. mild steel when powered by an engine-driven welder with a 240 V generator power outlet of 8 kW or more.
New Ergonomic Torch - The new HP-70 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
The 700i requires 230 V/50 A input power and compressed
air delivery of at least 4.8 scfm @ 90 –120 psi.
Maximum cutting of mild steel is 7/8 inch at 50%
duty cycle for heavy duty production requirements.
air delivery of at least 4.8 scfm @ 90 –120 psi.
Maximum cutting of mild steel is 7/8 inch at 50%
duty cycle for heavy duty production requirements.
The 500i incorporates :
New Inverter Design - Powerful cutting ability at half the weight of prior model (AirForce 400). Weighs only 27.8 lbs.
Capable with Engine-Driven Welders - Complete cutting capability when powered by an engine-driven welder with a 240 V generator power outletof 6 kW or more.
New Ergonomic Torch - The new HP-50 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
Multi-Voltage Plug (MVP) - Allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle
Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
Capable with Engine-Driven Welders - Complete cutting capability when powered by an engine-driven welder with a 240 V generator power outletof 6 kW or more.
New Ergonomic Torch - The new HP-50 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
Multi-Voltage Plug (MVP) - Allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle
Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
Designed to cut up to 5/8 inch mild steel, the AirForce™
500i is powered by standard household receptacles
(115 or 230 VAC) using the MVP™ (multi-voltage
plug) designed to change voltage with no tools.
500i is powered by standard household receptacles
(115 or 230 VAC) using the MVP™ (multi-voltage
plug) designed to change voltage with no tools.
Call Bob Romero @ 800-783-3073 or go to www.brweldingsupplies.com
No comments:
Post a Comment